Our Oxide Polishing Suspensions provide very fine, gentle abrasion combined with chemical activity to remove absolutely all scratches and deformation, giving you the perfect surface finish required for verification.
You need a perfect surface finish for verification, for example using electron microscopy. Our Oxide Polishing Suspensions remove absolutely all scratches and deformation, giving you complete trust in your verification step.
You work with extremely hard, soft, or ductile materials that are resistant to mechanical preparation. They therefore require a chemical-mechanical step in order to remove all scratches and deformation. We have an Oxide Polishing Suspension optimized for every material type, giving you a perfect surface finish with zero compromise on speed.
If you have an automated lab set-up, avoiding process stops are a priority. Our NonDry Oxide Polishing Suspensions prevent costly interruptions and delays by ensuring that dosing tubes do not clog up. They also reduce the possibility of crystals from the suspension becoming embedded in polishing cloths, reducing the risk of scratches or having to repeat process steps.
Our three Oxide Polishing Suspensions – OP-S, OP-U, and OP-A – are optimized for every material type and preparation goal
Our NonDry Oxide Polishing versions – OP-U NonDry and OP-S NonDry – ensure that dosing tubes do not clog up, and reduce the risk of damage from crystals embedded in your polishing cloths
Our Oxide Polishing Suspensions are optimized for use with the MD/OP Chem, MD-Chem NonStick, and the MD/DP Nap polishing cloths
The chemical reaction of our Oxide Polishing Suspensions is uniquely formulated to build a brittle layer, which is gently removed by very small grain size particles
A variety of chemical additives can be added to our OP-S to increase chemical activity
With the lowest possible classification for all our Oxide Polishing Suspension products, we ensure the safest possible working environment and allow you to take the appropriate precautions
This innovative solution enables you to change polishing consumables in just two clicks – with one hand and no drips – making it easy to change bottles, while reducing cleaning and saving time.
• For very ductile and non-ferrous materials as well as ceramics
• NonDry version optimized to prevent tube clogging
• Grain size 0.25 µm (agglomerated)
• Download technical specification here
• For very ductile and non-ferrous materials as well as ceramics
• Grain size 0.25 µm (agglomerated)
• Download technical specification here
• For heterogeneous materials like composites, carbon, and low alloy steels
• NonDry version optimized to prevent tube clogging
• Grain size 0.04 µm
• Download technical specification here
• For heterogeneous materials like composites, carbon, and low alloy steels
• Grain size 0.04 µm
• Download technical specification here
• Alumina suspension
• For high-alloy steels, nickel-based alloys, and copper
• Grain size 0.1 µm
• Download technical specification here
Minimize your supply chain risk and ensure uptime with high quality consumables, reliably delivered when you need them. All consumables ship within 48 hours from our distribution centers across the U.S., Japan, China, Germany and Denmark. Our ISO 9001-certified LEAN production and strict, in-house quality control ensure all consumables perform as promised and contribute to a safer workplace.
Contact us